詳情請瀏覽銳亞的官網：www.reignmac.com

銳亞木工機械M33系列(**加工寬度330mm)

專業解決：木屋梁柱、大型木方的重切削加工。
φ50mm主軸，水平刀軸均配置外支撐軸承，切削動力強勁——M33重型四面刨系列

銳亞木工機械 M33 系列重型四面木工刨床優異特性：
1.  采用變頻調速，送料速度M33系列達5-25米/分。
2.  各主軸采用獨立電機驅動，切削力強勁。
3.  主軸直徑50MM，并配置前后兩對高精度高承載軸承支撐，更適合重型切削。
4.  每條水平軸均配備一組外支撐軸承，更適合工件的重型切削。
5.  主軸調整集中前方，操作方便。
6.  電鍍工作臺面，耐磨性好。
7.  配備短料輔助裝置，有效地提升短料的順暢送進。
8.  左立刀軸右側設置氣動側壓輪組，可靈活調節側壓力。
9.  上刀軸前壓板氣動壓緊。
10. 上刀軸后壓板氣動壓緊。
11. 第一段壓輪及短料裝置配備雙向氣缸（壓緊及提起），可以根據加工要求隨時退料、送料。
12. 上刀軸—送料橫梁電動升降及加工厚度設定。
13. 可調節出料側壓板，更能滿足不同厚度的木料的輸出平穩。
14. 多組下主動輥輪，提高送料效果。
15. 氣動壓緊式送料輪，可分段調整壓緊力，有利于厚度不同的木料的送進暢順。
16. 氣動進料螺旋底輥，更適合變形量大和含水率偏高的木料送進。
17. 工作臺面和拖板采用手動油泵潤滑，集中控制，方便操作。
18. 配置國際品牌電氣元件，穩定性好。
19. 全密封式安全防護罩，有效地避免木屑飛濺和隔離噪音，并起到安全保護的作用。

Heavy duty Four-Side moulder series M33( Max width330mm)
Professional solution for Heavy-duty process as large type of wooden house beam and wooden batten.
φ50mm spindle, out-ball bearings for all horizontal spindles, strong cutting powerful-M33 heavy duty moulder series.

M33 Outstanding character
1.  Inverter to feed 5-25m/min.
2.  Individual motor power for each spindle to ensure maximum cutting power.
3.  Spindle diameter Φ50 and two pairs of high-precision and high-load support bearing are more suitable for heavy-duty cutting.
4.  Horizontal spindle is equipped with out bearing, suit for heavy-duty working of workpiece.
5.  All adjustment of spindles is centralized in front of machine, to be convenient to operate.
6.  High chromed work table for good durability.
7.  The gear case is equipped, to be good for processing the short pieces.
8.  A group of side pressure wheel on the right side of left spindle, adjusted the pressure flexibly.
9.  Pneumatic pressure loading to the front shoe of top spindle.
10. Pneumatic pressure loading to the rear shoe of top spindle.
11. First group of feeding roller and chain-wheel box with pneumatic double- direction adjustment for press and raise, you can make the workpiece feeding or back-feed.
12. Electronic positioning to top spindle and feed beam.
13. Pneumatic in-feed bottom helical roller is more suitable for large deformation and high moisture of the wood to feed.
14. Multi-group bottom driving roller to improve the feed effect.
15. Adjustable out-feed side pressure plate can meet the different thickness of material output steadily.
16. Pneumatic pressure loading to top feed rollers separately adjustable for easy of feeding with variation in thickness.
17. Manual oil pump lubricates the work table and carriage, centralized lubrication is easy to control.
18. Adopting electric components from international brand with steady quality.
19. Sealed safety enclosure is for the protection against noise and dust, and it is helpful for the safe operation.