濟南**的雕刻機生產廠家，專業數控加工中心生產廠家，三工序木工換刀雕刻機，櫥柜門加工中心生產，自動上下料加工中心，三維立體圓柱8頭雕刻機，四軸四聯動雕刻機生產——品脈數控設備

3個主軸可以裝上3把不同的刀具，自動換刀來滿足完成一個工藝所需的不同刀具。

側面加工采用吸附塊固定方式，吸附力大，操作簡單。

龍門高度30CM，方便進料。

獨立機柜，CE標準布線，出廠前每臺雕刻機經過了絕緣電阻測試和耐壓測試。

床身采用鋼結構后壁方管焊接，經震動時效處理，堅固耐用，不易變形。

Three spindles can use three different tools for your three different designs’ processing

at the same time, which is similar with Auto-tool changer CNC Machine Center with three tools.

Special Vacuum System with: vacuum table with movable suction block , vacuum pump and tubes.

Higher gantry can be up to 300mm; Bigger gantry width can make sure every spindle’s effective working area.

Hervy bistratal Side plates which can keep large supporting power for the gantry’s moving perfectly.

Independently Electric Control Box, with perfect wiring and free moving pulleys.

Heavy Hard Steel Lath Body, dealing with Time-treatment, never to be deformed. Keep working High stability.

The table is also with locating rods, in order to fix the working piece easily.

Can work on the big wide board, also long and narrow board at the same time.

Chencan CNC router can promise that our any set machine is the best quality and high-speed.